Clogging is the most common plumbing issue. It can be triggered by deposits of hard water salts, organic sediment and other debris that enters the sewer pipe, narrowing its inner hole.
In some cases, the clogging of the toilet is the result of the actions of the owners of the apartment, pouring the remnants of food into it, fermenting the homework and dirty water after cleaning the room. How to diagnose a blockage and what to do if a toilet clogged without attracting expensive specialists, we will try to understand this material.
Features of home sewage
Sewerage is an integral part of the drainage system and water supply. It is designed to remove liquid and solid human waste products, to purify household water from pollution and return them for further use or in a reservoir. Sewerage system is necessary for a comfortable stay in a house or apartment.
Residents of apartment buildings are responsible for the condition of sewer pipes in the apartment, and owners of private estates should independently deal with the construction of local treatment facilities, the withdrawal of sewage and maintenance of pipelines and equipment.
In order to avoid unpleasant problems in the future, it is necessary to comply with the requirements of regulatory documents of SNiP for wastewater and sewage. Then the system will work normally, without requiring constant monitoring or adjustment.
The presence of a properly designed and installed sewage system will make life more comfortable, help maintain ecological balance on the site and extend the life of buildings
The structure of internal sewer networks includes:
- plumbing fixtures with water drainage;
- common riser, to which sewer pipes are supplied;
- pipe routing, providing the process of transporting effluents from the drain to the riser.
Requirements for internal networks are indicated in SNiP “Internal Sewerage”, in GOST and SNiP “Sewerage”. The systems are mounted inside the building and provide transportation of all effluents from the place of their formation to the withdrawal of the pipe from the building.
Basic requirements for internal networks:
- When installing plumbing in the drain, a water seal is required.
- For laying networks, cast-iron or plastic pipes are used.
- The diameter of the discharge of the sewer system from the house is at least 110 mm.
- When laying pipes, a slope with a value of 2 to 2.5% must be maintained.
Internal networks of the sewer system must be equipped with ventilation. The process of venting the networks is carried out through the common risers of the sewage system - an exhaust part is installed, which is led out to the roof.
The main reason for clogging sewer pipes in the bathroom is a significant accumulation of fat and other deposits on the inner surface of the pipe
Due to the resulting blockages, normal drainage becomes impossible, therefore, it is necessary to immediately resume the full functioning of the sewer system. In order to avoid unpleasant consequences due to clogging in the pipeline, you need to call specialists or clean the sewer yourself.
What is the sewage system in apartments?
Sewerage in modern apartments performs the task of disposing of human waste. To this end, from each point where waste is generated (toilet bowl, sink and bathtub), a waste discharge line to a common sewer riser is installed.
Apartments connected to neighboring floors are connected to it. Riser - a large pipe with a diameter of 0.1 m, located in the bathroom.
All sewer systems that are being built in multi-apartment and private houses must strictly comply with construction and sanitary standards.
Previously, only cast-iron pipes were used to equip the sewage system, but now mainly plastic pipes are installed. In a plastic pipeline, the possibility of clogging is less likely, since defects do not appear on the walls, and "overgrowing" of the cross section of the riser is very rare.
To facilitate the cleaning of the riser in a skyscraper, holes are made on each floor - sewer revisions.
The most common blockages are cast-iron pipes of the sewer system, which are found in houses of the old foundation. Overgrown pipes have increased resistance to runoff, are subject to external factors
The standard configuration of a plumbing fixture (toilet bowl, washbasin or bathtub) looks pretty simple:
- drain hole of the device;
- siphon (bent elbow that is connected to the waste disposal line);
- riser supply pipeline;
- large pipe or riser.
A blockage can be observed in any area, while it should be borne in mind that the reason for its appearance is man-made. In the case of using a plumbing fixture for its intended purpose, problems should not be observed.
What to do with signs of blockage?
Every property owner should know what to do if the toilet is blocked in the bathroom. The first step is to warn the neighbors living on the higher floor, and ask them not to use the toilet, bathtub and wash basin temporarily. Then it is recommended to make chop or kvach, which should plug the drain hole.
A method of manufacturing the most simple chop:
- We need to take a wooden block about 0.5 m in length, the cross section of which is 1 cm less than the discharge of the toilet.
- The bar should be wrapped with sheet foam rubber (1 cm in thickness) in several layers.
- On the "bulda" you need to put on a few plastic bags, bandaging them with twine.
- The chopstick must be firmly installed in the drain hole.
After that, with the help of neighbors, you can find out the cause of the clogging of the plumbing device and determine the place of clogging.
The most correct solution for a clogged toilet is to call a plumber of the housing office, which will make an accurate "diagnosis" and fix the problem on its own or call the emergency service
If the water from the toilet slowly leaves, and your neighbors are fine, then the blockage occurred before the mains entered the sewer pipe. With local blockage, you can call the plumber to your house, or you can try to independently eliminate the cause of its appearance.
If the water in your toilet rises with closed taps and without draining the tank, then the blockage is located below the common riser.
A common cause of toilet blockage is “overgrowing” of sewer pipes. In this case, a rag or other object thrown into the toilet will lead to unpleasant consequences.
In most cases, eliminating the clogging of the toilet or cleaning the sewer pipe can be successfully carried out independently. Chemical and mechanical methods are used to clean the pipes. Methods for removing blockages in an apartment building or in a private house do not have cardinal differences.
The main causes of clogged toilet
The main task of the owner of the house is to timely determine the problem of clogging of plumbing and urgently take measures to eliminate it. With stagnation of water in the toilet, it is necessary to act promptly, but first you need to determine whether the water drains in the remaining sewer nodes (sink, shower, bathtub).
The main causes of clogged toilet:
- "Overgrowing" of sewer pipes;
- improper use of plumbing equipment;
- unsuccessful choice of model and errors when installing the toilet.
If the water from the toilet gradually leaves, and your neighbors are fine, then the blockage is located no further than the outlet of the main to the sewer pipe. In the case of local clogging of plumbing, you can call a professional specialist, or you can try to fix the problem yourself.
The main reason for the slow drainage of water is the “overgrowing” of sewer pipes.
As a rule, minor blockages can be eliminated independently by various methods. Home sewer cleaning: soda, cable, plunger
If you violate the rules for the operation of the sewer system or because sand, fat, hair and other insoluble substances get into the system, blockage often occurs. The clearance of the pipe is reduced and if the problem is not immediately eliminated, then the drain is condensed, causing "paralysis" of the sewage system.
As a result of the plumbing clogging, the water stops partially or completely leaving, and an unpleasant smell appears in the bathroom. In order to eliminate this problem, it is necessary to clean the sewer.
Errors in the installation of plumbing equipment usually occur with the wrong choice of toilet bowl model, which does not constructively combine with its installation location. The presence of this problem is indicated by the incorrect slope of the drain line from the plumbing fixture to the riser. In rare cases, the construction of the toilet contributes to the formation of blockages.
In order to correctly choose the best quality sanitary equipment for your conditions, it is recommended that you consult professional plumbers before buying
Clogging the riser in an apartment building is a “public” problem, since you or your neighbors can initiate it, and collective participation is not ruled out.
Blockage of liquid waste along the highway within the apartment is your problem, so it is better to eliminate it yourself. Rags, cat litter, diapers, construction debris and other objects that have fallen into the toilet do not belong to liquid waste, so these blockages are eliminated quite difficult.
We also recommend that you read our other article, where we examined in detail the types of sewage blockages. Interested in details - follow the link.
Effective Ways to Eliminate Toilet Clogging
Clogs often form in sewers, as a result of which water stagnates and it becomes impossible to operate plumbing equipment. At the same time, an unpleasant odor arises in the bathroom, which cannot be weathered.
Before you start cleaning sewer pipes, you must identify the source of the appearance of stagnant water. Typically, a toilet blockage is the result of improper use of the drain hole.
In every 2nd sewer pipe there is a mud plug, which can cause discomfort to residents of an apartment or a country house
There are several effective ways how to get rid of a blockage of the toilet on your own.
Method number 1 - pipe cleaning with vinegar and soda
If sewage pipes clogged in the bathroom, in most cases you can not ask for help from professional plumbers. First, you can try to clean the sewer system yourself, using water, table vinegar and soda. This is a simple and effective way to clean sewer pipes from simple blockages.
Quick help with a simple blockage of the toilet - soda, vinegar and hot water. These methods are characterized by accessibility and ease of execution.
Before you begin to eliminate the blockage, you need to heat a bucket of water to the boiling point, after which you need to pour water into the problematic toilet, while creating a strong pressure. To do this, install the bucket in such a way that hot water spills into the toilet bowl as quickly and at right angles.
If the liquid after cleaning began to gradually go away, you must repeat the procedure. These simple steps will help to cope with light blockages.
An equally difficult option is to clean the toilet from clogging - using vinegar and ordinary soda. The ingredients are poured into the siphon in equal quantities (2-3 tablespoons). After about 20-30 minutes, they can be washed off with hot water. Despite the simplicity of the above steps, self-elimination of clogging requires strict adherence to security measures.
Image Gallery
Photo from
For the dissolution of organic clogging, commercially available products are used in septic systems. They do not harm pipes and equipment, do not upset the balance of the environment.
If at the moment you do not have a specialized product, a mixture of hot water and soda is suitable. Boil the water, but pour not hot, but slightly cooled. Pour soda 100-200 g, depending on the degree of clogging
A hot solution from 1 cup of soda and 2 cups of vinegar dissolved in 1 liter of water can be prepared in advance and filled in the finished bowl of the toilet bowl
A factory-made compound or home-made solution designed to remove organic cork does not need to be washed off. It should be left in the toilet for 4 - 8 hours, preferably at night. In the morning, a large amount of water is poured into the bowl, if it does not go away, then they begin to destroy the blockage by mechanical methods: a plunger, a cable and similar devices
Organic Clog Dissolving Agent
Soda and hot water
Hot solution mixed with vinegar soda
Waiting for organic cork to dissolve
Method number 2 - hydraulic cleaning
There are a lot of methods for eliminating the toilet blockage, so it is difficult to say which one will help. Consistently applying different techniques, you can solve an unpleasant problem.
If you have a simple blockage or it has just begun to appear, then you can pour several buckets of boiling water into the toilet with a hose. This method is used if the blockage is deep and the water leaves slowly. It helps against organic blockages, sand and other small particles.
When the walls of the pipe are overgrown with grease and oil deposits, the effect can be seen almost immediately, since the hydraulic method quickly erodes such a seal
To do this, a special hose must be run into the drainage line. The other end of the hose must be connected to hot water. By adjusting the pressure to maximum pressure, it is possible to erode the clogging of pipes, up to dissolution.
Performing such a cleaning, you should beware of backflow, so this method is used if the toilet is not completely filled with water, if there is a hole for the drain.
Method number 3 - the use of household chemicals
Consumers can find remedies for clogging plumbing equipment in household chemical stores. Effective special products in the form of granules, powders, sprays and liquids allow you to quickly and easily eliminate an unpleasant problem.
The modern chemical industry also produces a variety of products to prevent the occurrence of blockages. They help to control the condition of sewer pipes and provide a long service life.
The chemical method helps with the appearance of blockage caused by the presence of a large amount of organic matter in the toilet. Chemicals contain alkali, under the action of which organic waste is completely dissolved and form a loose precipitate.
When using them, alkali should be avoided in the eye area and on the skin. After a while, the blockage in the toilet dissolves, and the water leaves.
Liquid, dry or granular chemicals are used to eliminate clogging of the toilet in the amount indicated on their packaging
Alkali is not dangerous for plastic or cast iron pipes. If the pipes are steel, then chemicals must be used carefully. Acid-based products can only be used for plastic pipes.
About the most popular and effective means for cleaning up blockages we described in this article.
It should be noted that a single cleaning of the equipment with special tools does not always help, after a while it must be repeated. You can combine the chemical method of eliminating clogging with the mechanical one.
Chemical methods of exposure can be successfully combined with mechanical, which is especially important for those who at a particular unpleasant moment do not have plumbing tools and devices:
Image Gallery
Photo from
Step 1: Extending the Metal Hanger
Step 2: Dip the wrapped edge of the hanger into the toilet
Step 3: Pouring caustic chemical into the toilet
Step 4: remove stains and eliminate odors
Method number 4 - plunger and its analogues
If the above methods do not have a noticeable effect on the blockage, then before calling the plumbers, you can try to fix the unpleasant problem with a plunger with a rubber bowl having a diameter of 10 cm.
To effectively eliminate the blockage of the toilet, today both a classic plunger and tools of a more modern modification are widely used.
To obtain an effective result, it is first necessary to remove excess water from the toilet. Water should cover only the rubber part of the tool used.
If there is no plunger in the farm and pipe clogging has arisen and requires immediate removal, you can use a variety of homemade tools. Despite their rather primitive appearance, in most cases they turn out to be an effective and inexpensive means of solving an unpleasant problem.
Image Gallery
Photo from
The first, most indicative sign of a clogged toilet is poorly and slowly flowing down the drain. It is not necessary to wait for complete clogging, it is better to determine the clog in the initial stage, when a small amount of water begins to linger in the bowl. If water is not removed after 2x-3x “empty” rinses, cleaning measures should be taken
To reduce the amount of pollution that inevitably accompanies such work, we will lay down old newspapers on the toilet floor, change clothes and put on rubber gloves with a high bell
We take a plunger with a large suction part, preferably with an increased working area. If we have a new plumbing fixture, soak it in hot water to soften the rubber
We insert the plunger into the toilet bowl so that its working part completely covers the hole. The plunger must be immersed in water so that pumping is carried out with water, not air. If there is not enough water, it must be refilled.
Step 1: Identify Signs of Clogged Toilet
Step 2: Preparing the bathroom for cleaning the toilet
Step 3: Preparing the Plunger for Cleaning
Step 4: The process of cleaning the toilet with a plunger
You can use a plastic bottle with a pre-cut bottom. It is lowered into the drain hole with a cut end, after which a sharp pressure is applied to the bottle. No less effective is the “pusher doll”, which is easy to make from rags and a long stick.
Before using the “doll” for its intended purpose, it is necessary to secure the rag well with improvised means.
If you have a used vacuum cleaner or the ability to completely disinfect the device after use, instead of the plunger, you can use the technique:
Image Gallery
Photo from
Step 1: Preparing the Vacuum Cleaner for Cleaning the Toilet
Step 2: Dip the hose into the toilet hole
Step 3: Insert the hose into the siphon hole
Step 4: Removing the plug from the sewer system
Method number 5 - cleaning the toilet with a steel cable
This method is effective when there is a need to remove sanitary napkins, ropes, rags, etc. from the toilet. Organic and other wastes are usually caught in them, as a result of which a clog of sanitary equipment is formed that cannot be removed by chemical means.
A plumbing flexible cable is a hollow rigid axis that is equipped with a rotating handle. Every plumber has this tool. At the end of the cable, a spiral tip or a pointed tip made of wire is fixed, which allows to destroy the resulting blockage. The cable thickness is up to 5 mm, and along the length it must reach the sewer riser.
And about what are the cables for cleaning the sewer, read on.
The length of the cable may vary and is selected depending on the design of plumbing equipment. The tool will help eliminate the "distant" blockage of the toilet
To break the blockage mechanically using a cable, the spiral-shaped end of the tool is lowered all the way into the toilet bowl. Then rotate the handle clockwise to push the tool into the water seal.
Image Gallery
Photo from
Step 1: Prepare the plumbing cable
Step 2: Insert the cable into the hole in the toilet bowl
Step 3: mechanical blockage
Possible complications after breaking through a blockage
What to do if the cable runs into an obstacle:
- if the tool rests on the back of the bowl of the toilet bowl, pushing movements must be continued until it slides deeper;
- if the vertical wall of the riser interferes with the movement of the cable, then a tool with a length of more than 1.5 m is needed;
- if the toilet bowl has a direct outlet, the cable is pushed horizontally through the pipe to the riser. The tip of the cable may stumble on a blockage that must be pushed into the riser by translational movements back and forth.
If you eliminate the clogging by the cable yourself, then this must be done carefully and not only before the process of eliminating stagnant water.
With the mechanical method of cleaning plumbing, it is necessary to treat the blockage place several times, accompanying the cleaning of the toilet by flushing with hot water.
To destroy organic deposits on the walls of pipes, at least 1 time per month, two buckets of hot water should be drained into the toilet. A mandatory preventive measure is the cleaning of siphons with special chemicals.
The videos will help those who want to independently eliminate the blockage of the toilet and visually explore several ways to eliminate an unpleasant problem.
An easy way to remove clogging of plumbing fixtures with homemade tools:
Non-standard methods of cleaning the toilet:
We have listed the signs and main causes of toilet blockage in an apartment and in a private house. Depending on the cause and complexity of the plumbing equipment clogging, you can choose the best way to fix the problem. The use of a chemical, mechanical, or complex method to eliminate blockage will help solve the problem.
If you know other no less effective ways to clean the toilet from blockages, please share them with visitors to our site. Leave comments, ask questions, share experience in the block located under the article.