The installation or replacement of a gas stove can be entrusted to professionals. But only for this you will have to pay separately and wait for the arrival of the master. Some do the connection of a gas stove with their own hands - the work is not particularly difficult, but requires strict adherence to a number of requirements.
We offer familiarization instructions with a description of the stages of work, how to connect the unit to a gas distribution pipe and safety standards. This article is informative, and does not call for independent action, since all manipulations with gas are very dangerous.
Installation of gas stoves: regulatory requirements
According to the current legislation, gas systems are considered to be a zone of increased danger and intervention in their functionality is allowed only to employees of regional and local gas services, distribution companies or firms that have an official license to carry out such a plan.
Among the activities requiring the participation of a representative of the gas service include: initial connection of equipment, reconnection, scheduled and unscheduled repairs, installation of a gas meter, replacement of parts, etc.
The initial connection of the gas stove to the communications of the central system is always carried out only by an authorized representative of the gas service - a qualified installer who has permission
Even if the owners did all the work in person, starting the gas to the burner is allowed only after the specialist inspects all the connection nodes for possible leaks and officially gives the go-ahead for the activation of the equipment and its further correct operation.
The owners will be able to carry out the subsequent replacement of the stove with another model on their own, but the gas company will still have to inform about this.
Gas units prepared for installation must be registered with the appropriate service. Its employees come to the client every six months and conduct a scheduled inspection of the equipment for compliance with all standards and rules for safe operation.
For unauthorized connection to the network or the transfer of a gas pipe, a penalty is provided.
After the initial official connection of the stove to the central communications, the owner receives an agreement on the rules for the provision of gas supply services and a subscription book indicating the price for the supply of the resource
However, if after connecting the owner did not use the stove, and first invited the master to examine the correctness and quality of the compounds, no punishment will follow. The unit will be inspected, registered as a new gas flow point, and it can be used in normal mode.
Choosing a place for kitchen equipment
Before connecting the home gas stove to the central communications, a suitable place is chosen for it. It is advisable that the floor on the installation site be absolutely even, otherwise the hob is skewed and the dishes will not be able to cook evenly.
The bulk of modern units are equipped with adjusting legs, which make it possible to evenly expose the equipment even on the floor with noticeable defects and height differences.
To perfectly align the slab relative to the floor surface, it is worth using the building level. This simple tool will allow you to determine the most favorable position for household appliances with millimeter accuracy
If the model does not have adjustment, they simply lay thick cardboard, a piece of chipboard or a wooden plank under the edges of the lower part, aligning the hob in this way with respect to the floor level.
Install the gas stove in the apartment so that no objects or elements of the supporting structures touch its rear part
All connecting nodes must be freely accessible so that in the event of a leak or any other malfunction, problems can be resolved as quickly as possible.
They do not push the plate tightly against the wall, but, on the contrary, leave a small gap behind. Its size is usually indicated in the accompanying instructions by the manufacturer, and professionals recommend that this data is always strictly adhered to.
Preparation of tools and parts
For the correct connection of the gas stove, the following tools and parts are used:
- flexible hose the required length - universal - about 1.5 m, or individual rubber - from 1 m or more;
- ball valve made of nickel-plated brass, intended for operation in systems supplying subscribers with natural and liquefied petroleum gas of low and medium pressure;
- keys - gas and adjustable wrenches;
- gasket - usually sold complete with a stove;
- screwdrivers different types;
- sealing tape or a thread - for example, FUM tape or Loktail 55 thread;
- soap solution medium concentration and a brush to check the correctness and accuracy of the connection for leaks.
As soon as all the necessary components are at hand, proceed directly to work.
The way to connect the stove to the system
For independent connection of the gas stove to the communication nodes use special hoses with special physical characteristics.
Upon purchase, these parts are checked for strength and flexibility, and they also look at a quality certificate to understand whether the offered product meets the requirements for gas equipment elements.
It is only necessary to connect the stove to the central gas system directly. No unnecessary nodes and connections are provided by the rules. If the gas workers find them, the owner will immediately receive an order to reconnect
In some special cases, the plate is connected using a metal connecting pipe, however, this method is used extremely rarely, since it is labor intensive and has a number of inconveniences.
Types of modern gas hoses
A hose for connecting a gas stove is not purchased at the market or remote point, but only at specialized stores or company points of sale of installation equipment.
The sellers, in addition to the product itself, provide the customer with information about the technical specifications and issue a check, according to which the product can be replaced in the event of a malfunction.
When purchasing a connecting hose for a plate, you must always pay attention to the marking. Elements intended for use in gas systems always have yellow identification marks
Red and blue shades mark water hoses. They have much lower strength and burn out in gas systems 15-30 days after installation.
Today, 3 types of gas hoses are the most popular in the market of related equipment. Between them there are distinctive features, thanks to which the owner has the opportunity to choose the most successful option for himself personally.
Combine products with parameters such as flexibility and strength. Due to this, the stove connected to the system can be moved without fear of breaking or somehow damaging the gas pipeline and provoking a leak.
Before installing the stove, you need to inspect and determine whether it has an outlet - angular (bent down) or straight. For a corner, a regular hose with a standard edge is suitable, and for a straight one, a part with a square is required
Rubber hose Belongs to the category of the most popular connecting elements. It has a high level of strength, demonstrates excellent flexibility and costs quite reasonable money.
It is made from vulcanized rubber reinforced with textile thread. It functions perfectly in the temperature range from -35 ° C to + 50 ° C and can easily withstand severe operational load for a long time.
The thread at the outlet of the plate should coincide in cross section with the parameters of the connecting hose. Usually this indicator is 1/2 ′
If the unit has a 3/8 ”thread, then for a correct connection to the system, you will need to use a special adapter. Almost always, it comes complete with a stove. In case of absence, the item is purchased at a hardware store.
Metal braided rubber hose is an improved version of the above described option. The metal casing provides even greater product strength and virtually eliminates the occurrence of leakage.
The product is offered on the market in the widest assortment and has different lengths. This allows the use of this type of hose in any kitchen facilities and even where the stove is used with maximum intensity.
A gas hose with a metal braid can work in aggressive conditions (heat, cold, sudden changes in temperature). The metal that protects rubber from damage, has high anti-corrosion properties, does not rust and is not afraid of moisture
Bellows hose - This is a flexible piece of metal-plastic corrugated tube with excellent physical characteristics. It is produced using modern technologies, it is resistant to intense pressure and its drops, stretches well and has a surface protective shell of high strength.
The bellows hose has an unprecedented level of reliability and ensures safe gas transmission from the central system to home appliances. Its service life without loss of efficiency is 25 years.
The bellows are reproached with only a rather high price compared to similar products made from cheaper materials.
However, despite this, representatives of gas distribution companies strongly advise the owners to connect the stoves through the bellows hose in order to increase the level of safety during the operation of home gas units.
Additional information on the classification of gas hoses and their selection is presented in this article.
Basic hose requirements
The connecting hose used to connect the stove to the central gas system must meet certain requirements ^
- limited length - no more than 1.5 meters;
- evenness - the surface of the part without extensions or narrowed sections;
- lack of bends, knots and twists;
- durability - the service life can be obtained from the seller or from quality certificates confirming the compliance of the hose with the standards generally accepted for gas equipment;
- no cracks, incisions, rust and other visible damage.
Another important point to consider is that the hose must under no circumstances touch hard, sharp corners and materials subject to burning.
It is better if it will be freely located behind the plate, not adhering to any surface. Then the owners will be able to easily control his condition and will not miss the moment when a hose replacement is required.
Pipe connection
Connecting the stove to a centralized system using a metal pipe is a very reliable, but already outdated method. Today it is rarely used due to the complexity and the need in some cases to use specific professional equipment.
When connecting the stove to a centralized communications supplying a gas resource, copper or steel pipes are used. They have a high level of strength and guarantee a clear, reliable connection.
The main disadvantage of connecting using pipes is that in the future the stove can not be moved away for cleaning or moved to another place without resorting to disconnecting from the central communications.
Types of gaskets for gas systems
So that the connection points of the stove to the gas distribution system do not leak and ensure the integrity of all communications for years, use special sealants, for example, Loktayt 55 thread or FUM tape.
Employees of gas services do not recommend connecting elements from other materials. Their performance is too weak for such an impressive daily load.
Thread Loktayt 55 - A practical, modern material designed specifically for reliable fixation of connecting sections in communication networks of varying degrees of complexity.
It is a sealing fiber made of high-strength multifilament yarns, supplied in plastic containers and has various lengths (from 12 to 160 m, depending on the packaging).
Loktayt 55 thread is a universal element that provides threaded connections with reliable instant sealing even under strong pressure. The certificate allows you to use the product in gas systems without restriction
To create a tight connection, I manually wind the thread on the threaded section of the pipe fittings. It is instantly fixed in place and no longer changes its position.
The second reliable sealing element is FUM tapemade of PTFE 4D.
There are three types of FUM tapes on the market:
- Brand 1 equipped with additional lubricant based on petroleum jelly. It is used in industrial systems and communication networks with caustic, aggressive environments.
- Brand 2 It has no lubrication and is best manifested in complexes operating on various oxidizing agents.
- Brand 3 produced using edge fragments of the first two types and is suitable for both industrial and domestic purposes.
It is a thin thread laid in a film.
FUM tape demonstrates high anticorrosive qualities, shows good heat resistance and does not emit toxins during active use
The FUM tape allows for a strong connection of the pipe elements, which for many years will provide the system with complete tightness. The warranty shelf life of the tape in the container is 13 years.
Step-by-step process for connecting a gas stove
Before connecting a gas stove in a house or apartment, they find the most convenient place for it. Then remove the original packaging, screw the adjusting legs to the bottom of the unit and place the module in the selected area.
Between the equipment and the wall leave a gap corresponding to the dimensions indicated in the accompanying instructions for household appliances.
A building level is laid near one of the sides, and then, with the help of the adjusting legs, the plate is exposed as evenly as possible. First, carefully twist the legs on one side, and then on the other.
After all these measures, the unit takes a hard position, does not swing and does not roll either to the right or to the left.
Next, the equipment is connected with a flexible hose. To do this, from the outside, a layer of a special sealant is carefully wound on the thread of the hose fitting (Loktayt 55 thread or FUM tape, designed to fix individual sections in communication systems).
This will ensure further reliability and complete tightness of the complex.
Linen gasket elements for sealing in gas systems are not used, since their physical characteristics are much lower than that of the FUM tape and the Loktite thread 55
The hose fitting with a seal is screwed into the gas valve at the lower end, and the second open edge of the hose is screwed into the gas outlet thread.
When household appliances are connected for the first time, they turn to a specialized service and invite a professional craftsman with the appropriate knowledge and the right to activate the equipment.
When working with gas systems in the room, the windows are kept open and carefully monitored so that there is no open fire nearby
In the presence of a gas service employee, all docking places are treated with a medium concentration soapy emulsion, the tap is opened and the system is tested for possible leaks. If the gasman does not detect any problems, they begin to use the stove in standard mode.
Safety Rules and Tips
Self-installation of a gas stove is carried out in strict accordance with safety rules governing actions in contact with gas networks.
Norms required:
- The flexible hose connecting the unit to the gas supply system is placed in plain sight in an easily accessible place and in no case is it blocked. This item should always be available for inspection or planned replacement.
- A gas hose is made in strict accordance with generally accepted regulatory documents, not exceeding the permitted size per inch.
- The connecting sleeve itself is not painted, since the paint damages the surface and contributes to its premature cracking. If the appearance of the sleeve is not too aesthetic, it is masked under self-adhesive paper.
- Directly connect the hose only to the supply tap and gas stove. The adapter is used only in case of non-standard threaded connection of one of the outputs.
- Prior to the installation of the stove, the gas is shut off, turning the stop valve on the pipe from the supply riser to the stop, and notify everyone in the room about the work in progress.
- When installing, use only special tools, consumables, and components intended for work with gas valves.
- All pipes opened during connection are plugged immediately. For lowering, a thick wet rag is used as a plug. Water, absorbed into the fabric, gives the material a high level of gas impermeability.
- To temporarily close the feed pipe with 1/2 ″ thread, take a cork from the wine bottle. It is trimmed along the narrowed edge in the shape of a cone, treated with sandpaper and tightly “screwed” into the pipe hole. If the part is stuck, remove using a corkscrew.
At the end of work, the docked areas are coated with a soap solution of medium concentration, a gas shut-off valve is opened and the system is tested for leaks.
If the soapy liquid begins to bubble, the gas is again shut off and the joint areas are brought to complete tightness.
When the hissing is heard during the test run or the smell of gas is felt, the valve is immediately closed, windows, doors are opened and the emergency gas service team is called.
Sometimes when connecting or moving the stove, it may be necessary to replace the gas valve. This work is carried out only by representatives of the gas service with a preliminary shutdown of gas throughout the riser.
A detailed description of the process of installing a gas stove in an apartment with your own hands. Useful tips and curious nuances of the process. Recommendations for using the tool.
How to easily and quickly connect a gas stove in a residential building, which hoses and other related items to choose. Information on the cost of work.
Overview of bellows hoses for gas fired stoves. Pros and cons of details and expert opinion on whether to use them.
The basic rules for connecting a gas stove in an apartment or a private house are not complicated. If you carefully study the installation instructions, use a suitable tool and observe safety measures, the process will go smoothly and will not take much time.
When there is no self-confidence, it is better to contact the gas distribution company at the place of residence and invite professional craftsmen to the house. They will quickly install and do everything in strict accordance with the regulations and generally accepted standards.
Anyone interested in connecting a gas stove or oven are welcome to leave comments and ask questions. The contact form is located in the lower block.