LED lamps everywhere replace incandescent bulbs, because they are energy efficient and durable. But often, buyers bypass these “LEDs" side, because they can not understand their labeling.
The technical characteristics of LED lamps are more diverse - before it was enough to choose the power in Watts, and with new sources of artificial light, everything is somewhat more complicated. To choose the best option, you need to consider a number of parameters.
We will help you understand the characteristics of LED lamps, explain the meaning of marking, and also give practical advice on choosing lamps for different rooms. The detailed information presented will be a valuable help in organizing comfortable lighting of an apartment, house or office.
LED lamp specifications
To choose the right LED bulb, you need to study all its parameters. The light emitted by it differs from the more usual radiation of incandescent lamps. Moreover, this luminous flux is far from being as uniform as before.
LEDs differ greatly in color shade (color temperature), scattering angle and other parameters of the emitted glow.
When buying an LED lamp, the main attention should be paid not to large advertising numbers, but to the description of the parameters in small print - there all the most interesting. A detailed study of them will avoid many mistakes
The abbreviation "LED" means an abbreviation for Light-Emitting Diode. This is the LED lamp for artificial lighting, which are sold in lighting stores. They are used in lighting fixtures installed both on the street and in various purpose premises.
A single mandatory labeling for all LED lamps is not provided. Each manufacturer forms its own article. Of course, the main technical characteristics of the product are contained in it.
However, this is often done in the form of abbreviations, which are not so easy to understand. Moreover, a number of parameters are indicated only on the box from under the bulb.
All this must be taken into account when choosing LED. It is recommended to select LED lamps for each room and lighting zone individually. In this matter, not only the color temperature is important, but also other characteristics of the LED lamp, and it has a lot of parameters.
Color temperature and hue
On the packaging of each LED lamp, the color temperature indicator is always in the most visible place. This is the main characteristic of this lighting fixture.
If in ordinary bulbs with an incandescent filament made of tungsten, the color of light is in a narrow range of 2200–2800 K, then for LEDs it fluctuates in a much wider range.
Often, the "color temperature" of the LED lamp is mistakenly equated with the "heat" emitted by it, but LED, in contrast to the "Ilyich’s bulb," practically does not emit thermal energy during the glow (+)
This indicator does not correlate with the heating temperature of the surface of the LED bulb and its radiated heat. At maximum, the LED can heat up to 60–65 ° C. For comparison, the analogue with an incandescent filament per 100 W is heated up to 250–265 ° С.
Almost all of the electricity in the LED is converted to light. And no matter what color spectrum it refers to, the temperature of surface heating will always be approximately the same.
All LED lamps according to color temperature (light color) are usually divided into three groups:
- WW (Warm White) - “warm white” with a radiation spectrum of 2700–3300 K;
- NW (Neutral White) - “natural white” with a range of 3300–5000 K;
- CW (Cool White) - “cold white” with light emission> 5000 K.
According to human perception, the first option approximately corresponds to the illumination in the street from the sun at the horizon. The second is sunlight at lunchtime in clear weather. The third one at the beginning of the range coincides with the radiance of the sun at its zenith, and when going to 6500–7500 K it is equal to natural daylight when it is cloudy.
The color temperature of the LED indicates the shade of the light emitted by the lamp in the lighting device - warm “WW” tones calm down, and cold “CW”, on the contrary, invigorate and set to work (+)
Choosing the color of the light, you need to focus on where later the lamps will be used. Warm yellow shades are more suitable for bedrooms, and whites of a natural or cold spectrum are more suitable for a corridor or kitchen.
The right choice of LEDs is a science. And the main thing here is to build on the room itself. An improperly selected LED bulb can greatly damage a person’s eyesight.
Lighting designers have to take into account not only the color of the LED, but also the brightness with the color rendering of the light source. At the same time, the influence of the created lighting on people's perception plays an important role.
When a person enters a room from the street, the human eye has to quickly adapt to the changing light. Often the colors of objects in the first minutes even seem distorted and incorrect.
The degree of color rendering of LED lamps
The second most important indicator of light of an LED lamp is the color rendering index, indicated in the marking CRI or Ra. This indicator is responsible for the naturalness of the transmission of all shades of color from an object that falls into the beam of a lighting device.
The maximum Ra is 100 (this is the reference sunlight that a person encounters at noon in clear weather) - usually this parameter for LED lamps ranges from 80–90 (+)
If Ra <80, then objects in the lighted LED room will visually appear dull. It should be understood that the perception of colors is individual for each person. Plus, with age, its distortion also occurs.
For the standard Ra = 100, it is customary to take undistorted color reproduction, which is formed when the object is illuminated by the sun. That is, this is how we usually see him on the street with bright natural, rather than artificial indoor lighting.
The color rendering index of LED lamps can conditionally be divided into four classes:
- 100 - maximum, which is equivalent to the perception of color in natural light;
- from 100 to 90 - such bulbs are designed for places where the most accurate color reproduction is required (laboratories, workstations and areas);
- from 90 to 80 - options for ordinary living rooms and general lighting;
- below 80 - lamps in fixtures for corridors, toilets and utility rooms, where high quality shades are not so important.
There is no direct connection between color rendering and color temperature. These are independent from each other characteristics of an LED lamp.
Scattering angle and luminosity
One of the advantages of LED lamps over conventional ones is the narrow focus of the light flux. By itself, one LED forms a light beam only directly in the direction from its housing.
Usually several pieces or an entire array are inserted in an LED bulb to create a specific cone of light. The same incandescent lamp, on the contrary, shines immediately in all directions in a circular.
Lamps with a narrow angle of dispersion are widely used in zoning rooms and in night-lamps, with their help, the designer sets accents and highlight a separate space in the interior
The luminous flux of LED bulbs can be scattered at an angle from 60 to 340 °. Narrowly targeted options are used to organize oriented spot lighting and to illuminate specific areas in the interior. Wide angle lamps are designed for general ceiling lighting.
The luminous intensity (light output) reflects the radiation efficiency of the LED lamp. This characteristic is measured in lm / W. The value in lumens (lm) is the value of the luminous flux, and Watts is the power of the bulb. In the marking, they are indicated together with a single digit in lm / W or separately.
The higher this indicator, the more energy-efficient and economical LED lamp. On the other hand, the greater the luminous flux value of a particular light bulb, the less such products will be required to illuminate the room.
Design: base and flask
Structurally, the LED lamp consists of:
- a printed circuit board with a driver for converting an alternating current to a constant current;
- light source - one or more LEDs;
- diffuser flasks designed for uniform light scattering;
- base and housing.
In addition, there is a small radiator inside, which dissipates the thermal energy generated by the glow of the LED crystal. Although it is formed a little, but it is still there.
Of all these elements, the buyer of an LED lamp may be of interest only in the shape of the bulb and the type of cap. Other details are not even described in the marking and data sheet of such bulbs.
LED lamps are now available with all types of socles (threaded, pin, spotlight, etc.) - this is specially made for their wider distribution and easy replacement of old analogues (+)
Most often, at home, LED lamps are used with standard threaded sockets.
They have the letter "E" in their designation and a number indicating the size of the diameter. A typical variant is the E27 base, similar to a conventional household lamp with a filament of 60, 80 or 100 watts.
In the houses you can also find light bulbs with the E14 minion cap (“candles” for sconces).
The bulb in shape of the LED lamp can be anything from a classic pear-shaped to twisted and tubular - for each lighting project there is a most suitable option
Models with a G or GU pin base are designed to replace halogen analogues. And the GX is a small flat lamp for recessed lighting. They are mounted on the walls of furniture and ceilings.
The housing design also varies in degree of protection IP. In dry rooms without any particular dust (for example, corridors and bedroom apartments) IP20 or IP21 is enough. For installation in kitchens, bathrooms or garages, the lamp should be selected with IP56 and higher. And for the street, only models with a minimum of IP65 are suitable.
Power and power settings
The LED is powered by a constant voltage of 12-24 volts. So that the LED bulb can be screwed into a 220 V lamp, the required transformer is in its casing. For LED strips, this converter is an external device. For lamps, it is already built into the base.
With voltage drops in the network, a high-quality LED lamp will not burn and will continue to shine, it has built-in protection. However, light output with a reduced voltage will be lower than with proper nutrition
In incandescent lamps, the brightness of the glow and the power consumption are directly connected. The higher the first indicator, the higher the second.
With LED analogs, the situation is somewhat different. Here, the brightness is determined by the characteristics of the LEDs installed inside and their number. At the same power, different LED lamps can vary greatly in luminosity and color temperature.
LED selection for different rooms
The least tired are the vision of a lamp with natural white light. However, for residential premises it is still recommended to select LEDs with a soft yellow tint of glow. Artificial light from them is more comfortable with prolonged exposure to the eyes. Bright room lights sooner or later begin to annoy.
The best option for LED lighting for the home is the “warm yellow” diffused light from the ceiling and spotlights with a neutral white spectrum in the zones
Lamps with cool blue shades are more suitable for offices. There, the “vigor” generated by them, vigor and concentration will be most welcome. But in the bedroom and the nursery such options are definitely not worth installing.
Another point is the ripple of the LED bulbs. If the board with the transformer for LED is designed unprofessionally, the lamp will pulsate. This is the result of its AC power supply.
In the vast majority of cases, this is even invisible to the naked eye. However, this constant pulsation has its negative effect on vision and the brain. When buying LED lamps, do not chase excessive cheapness.
It is at this point that many negligent manufacturers and save, then creating problems for consumers with well-being.
The manufacturer will also play an important role in choosing diode bulbs. We have prepared a series of review articles on LED lamps from different manufacturers.
We advise you to familiarize yourself with:
- ASD LED bulbs: product line overview + selection tips and reviews
- LED lamps "Era": reviews about the manufacturer + a brief overview of the model range
- Osram LED lamps: reviews, advantages and disadvantages, comparison with other manufacturers
- LED bulbs & # 8220; Gauss & # 8221 ;: reviews, an overview of the advantages and disadvantages of the manufacturer
To make it easier for you to understand how to choose an LED lamp, we made a video compilation with reviews from different manufacturers and a detailed description of their work.
Comparison of different models of LED lamps:
Description of LED characteristics in full detail:
How are LED bulbs designed for household lighting:
When choosing an LED lamp for a household lighting fixture, it is necessary to take into account all its parameters and technical specifications. There are a lot of them, but the time spent will definitely pay off. And not so much with money as with the well-being and comfort of households.
Have something to supplement, or have questions about choosing LED lamps? You can leave comments on the publication, participate in discussions and share your own experience in using such lamps. The contact form is located in the lower block.