The now-popular linear LED lamps were able to confidently supplant fluorescent, gradually fading into the past. The output of diodes is actively growing, because they attract practicality and excellent performance. However, the assortment is still little known to the buyer. Do you agree?
You will learn all about the design features, advantages and disadvantages, varieties of tubular LED lamps from our article. We will tell you how to find the best option for you, based on the characteristics. Our home masters will find a guide for installing LED devices instead of old fluorescent ones.
LED Features
Light-emitting diode (LED) light sources gradually take the place of fluorescent lamps. They have every chance of completely crowding out other lighting technologies. Distinctive features are economical, device features and long service life.
In addition, diodes do not require special measures for disposal. In contrast, fluorescent linear lamps, massively used earlier in enterprises, in trade areas and offices, need a specific disposal procedure, because they contain mercury. Whereas with overview samples, this expense item is leveled.
Many large companies are deciding in the direction of new models of linear LEDs. At the same time, not a complete replacement of lamps is more popular, but only a change of the lamps themselves
Led devices give even and moderately contrasting, high-quality lighting. Such light is considered safe for vision and tireless for the human nervous system. Therefore, it is not surprising that such a high stir on this line of devices in educational institutions.
However, tubular diodes are used not only in the educational and industrial segments, but also in others - to create a light composition in residential premises, restaurants, gyms, pools, etc. In some cases, they are used as the main source of lighting, in others - in the role of highlighting.
There are also additional possibilities for organizing illumination - the angle of light can be adjusted by turning the lamp. This streamlines lighting in areas where there is a need. Thanks to this technique, additional savings are achieved through the use of fewer lamps.
The housing of the LED device, like other structural elements, has increased resistance to vibration, due to which a high degree of reliability is achieved
The LED lamp does not spend time on ignition - this process is reproduced instantly, while the maximum level of working brightness is immediately achieved. Subject to interruptions in the power supply network, voltage drops, of course, the ballast of the lighting product may fail.
However, the worst option awaiting the consumer is the replacement of one burned-out device, i.e. each linear device is represented by an individual mechanism with its own electronics.
The review form factor is twice as economical in comparison with the luminescent analogue. The operational period is up to 12 years
If the modernization of obsolete fluorescent illuminators is carried out, then the most practical solution is to change the lamps. In this case, both the old lamp housing with the previous cartridges can be involved, and a new one can be purchased.
In the first case, it will be necessary to select diodes with full compliance with the previous size. Before installation, it is necessary to remove all electromagnetic and electronic ballasts from the circuit or bypass them qualitatively.
Key Benefits of LED
Linear LED lamps are an innovative element in the industrial, commercial and public systems of organizing light due to insufficient public awareness of the main advantages of this type of lighting technology.
Key features are as follows:
- Connection to a network with a nominal value of 220 V directly without the use of ballasts and chokes.
- Low power consumption, which allows significant savings.
- Wide dispersion angle - up to 230 °.
- Depending on the manufacturer, the service life is 50,000-100,000 hours.
- The environmental friendliness of the diodes does not harm the environment; disposal is carried out together with household waste.
- Complete lack of flicker.
- It does not heat up during prolonged use.
Also, the features of the structural device of the case allow to achieve resistance to the influence of negative factors: temperature, moisture and voltage drops, mechanical stress. And due to the high color rendering coefficient and a brightness level of 120 lm / W, the correct visualization of surrounding objects is achieved.
LED devices provide uniform dispersion of light flux during the entire operational period, without the effect of rattling noise. Such lamps do not emit heat.
The elimination of the pulsation effect became possible due to equipping with special elements - amplification lenses and light diodes, which are responsible for compaction and concentration of the light flux.
In addition to the natural monochrome cold and warm white tones of lighting, manufacturers offer various color effects (RGB performance), which are mostly used for decorative purposes by entertainment venues or to illuminate billboards.
The main problems that accompany the mass introduction of this technology are the high price category and the lack of state control of quality characteristics presented in product stores. About 50% of lighting devices do not comply with current GOST standards.
Lamp design
An optional device of linear light sources is represented by a driver and soldered LEDs placed on a strip of getinaks. All elements are in an elongated bulbous polycarbonate housing.
Using such material, manufacturers were able to eliminate the problem of mechanical damage during installation. Since the device already has a ballast apparatus, the handset is connected directly to the mains without ballasts.
The power of linear tubes depends on the number of LEDs - the more there are, the more intense the light flux. They are adapted to replace fluorescent analogues without mechanical interference with the luminaire design.
LED tubes come standard with a G13 socket. On the inside of the flask there are two pins, the distance between which is 13 mm. They are connected by copper wire, so electricity can be supplied to any of them.
The length can vary from 600 mm to 1.5 m, power 9-25 watts. Savings in paying electricity bills can be up to 65%. For example, if you install an LED in place of a fluorescent lamp with a power of 18 watts, its nominal value will correspond to 9 watts.
Long tubular models are used for local illumination of necessary zones. It is easy to construct various forms from them, which effectively decorates the room
The lamp may be transparent or have a matte finish. In the case when the diffuser is not provided on the luminaire, it is better to opt for a matte version, if available, a transparent one will do.
LED lamp classification
The main purpose of linear lighting is the replacement of fluorescent lamps, so most of the tubular models are made with a G13 socket.
Location Conditions
Fully equipped linear lighting devices consist of a luminaire housing and one or more lamps. They can serve as the main or local lighting of various zones both indoors and in the exterior of the building or landscape design.
In addition to the main selection criteria, the characteristics of the diode lamp, there are several more important criteria for the buyer.
There are various devices, according to the characteristics of which the classification is carried out:
- location;
- installation method;
- a kind of cap;
- luminous flux intensity (lm / W);
- types of LEDs used and their quantity.
All these aspects are important in the process of selecting the right device, i.e. not all products have a sufficient coefficient of protection from the adverse environment or are not mobile enough to equip the interior of the room.
To illuminate household plots, more powerful sources are used - floodlights. Their power is 17-45 W, voltage is 170-265 V, and the luminous flux is 1400-4500 lm / W, operational life is up to 35 000 hours
For the street, linear LED floodlights are used, which can be of various shapes and use any type of diode: monochrome or full color. The former are capable of reproducing only one spectral range of lighting - white and its shades.
The second - any color options. Based on the climatic conditions of placement, devices are designed for different installation zones. Depending on this, an appropriate indicator of the degree of protection against an aggressive environment is selected.
Decoding of the abbreviation IP65: IP - an indicator of the coefficient of protection; 6 - the device is protected from dust inside; 5 - degree of safety against penetration of water
Lighting technology marked IP65 and IP67, i.e. with the specified degree of protection, suitable for installation on the street and in rooms with high humidity / dust formation. For example, lighting is organized in warehouses, in production shops, swimming pools, lighting of aquariums and open external territories - parking lots.
Instrument housing is sealed. Unique self-cleaning options also speak in their favor - due to heating during operation, ice does not form on the body and snow does not accumulate. Devices with IP20 are designed for standard parameters with a low level of humidity. They are used in residential or office premises.
LED phytolamps are an alternative to luminescent analogues like OSRAM FLORA. Their distinctive feature is that they do not radiate heat, respectively, they are allowed to be placed in close proximity to plants
Linear phytolamps have a special spectrum of rays that promotes the formation of chemical processes for the growth and development of plants. With their help, the continuation of daylight for certain varieties of root crops is organized, which safely affects their photosynthetic activity.
Basic installation methods
Overhead linear fixtures have the easiest installation system - they just need to be fixed on a flat plane. In this case, the level of inclination of the surface does not matter - the lamp has a swivel base.
Structurally, the device is designed so that the user has the ability to change the angle of illumination. It is due to such universality that the models are recognized as the most popular.
Often, overhead appliances can be found in the backlight of the working area in the kitchen. There are also interior options with led stair lighting or an emphasis on specific areas through shading ranges
The next installation option requires preliminary preparation and organization of a niche. It is used in the construction of suspended and suspended ceilings to organize full lighting.
Installation of recessed luminaires has its own specifics and is more complicated in comparison with overhead counterparts. They are recessed into the prepared recess, do not protrude beyond the ceiling
Suspended modular systems are placed at a certain distance from the ceiling by means of decorative chains or cables.
Such a mount allows you to create a whole light composition from several LED tubes, repeating the shape of various shapes. To do this, they are interconnected with special plugs.
For convenience, when using modular lighting sections, they are suspended at a level exceeding the height of a person. The connecting chain, depending on the complexity of the reproducible form, can consist of two or more modules
Hanging modules include phytolamps. If they are equipped with greenhouses, most often they have a standard - solid line along the rows of seedlings. At home, basically one unit is used, which is installed above the plant.
Lamp / bulb connection system
In the overview models of lighting, two types of socle are used: G and R. However, it should be borne in mind that every year manufacturers expand their product line.
Lowercase letters in the abbreviation of LED lamps indicate the number of contacts: S - 1 contact; D is 2; T is 3; Q is 4; P - 5
Initially, we will analyze what the pin connection system G is. The marking is followed by a digit indicating the distance between the plugs. This version of LED-lamps is available in the form of an elongated bulb, as indicated by the letter T in the abbreviation. Attachment plugs are represented here by a pair of contacts of a certain length and thickness.
Tubular (T) LEDs can be of several typical sizes:
- T5 - 5/8 inch / 15.9 mm;
- T8 - 8/8 inch / 25.4 mm;
- T10 - 10/8 inches / 31.7 mm;
- T12 - 12/8 in. / 38.0 mm.
Cartridge with R deep contacts is found exclusively in floodlights. According to the characteristics, the angle of light flow is insufficient to cover a large area, so it is advisable to use them for zonal illumination.
Color Temperature Options
The intensity of the light flux is selected individually.
Compliance standards are represented by the following values:
- for a power of 25 W, a light flux of 220 Lm is characteristic;
- 40 W - 415 Lm;
- 60 W - 710 Lm;
- 75 W - 935 Lm;
- 100 W - 1340 Lm;
- 150 W - 2160 Lm;
- 200 W - 3040 Lm.
However, it is better to take into account the optimal indicators that do not irritate eyesight: warm white light - 2700 K, natural white - 4200 K. Such brightness is equal to standard sun light, comfortable for the retina.
Differences between LEDs
Technical characteristics of different types of LEDs used are presented in a wide range. Their sizes, quantity and parameters are indicated in the name of the device.
Light diodes SMD (surface mounted device) are located as close as possible relative to the heat sink. The power of one chip is approximately 0.01-0.2 W
Unlike other types, crystals of the form factor SMD are mounted on the surface of a ceramic substrate, which, in turn, is connected to a circuit board. On one substrate, their number is from one to three.
Due to the design features, they can qualitatively remove heat. As a result, the parts do not overheat even during prolonged use, which contributes to a significant increase in service life.
The technological process of creating crystals is based on organometallic epitaxy. The prepared material is mounted in a protective housing. After summarizing the contacts. At the finish, an optical coating reflecting radiation is installed on top of the chip.
The most common options are SMD5630 and 5730. They are powerful and super-powerful groups and are used in mains with a rating of not more than 350 mA.
Distinguish modifications mounted in the housing, with electricity consumption up to 1 A, with indicators - 1-3 watts. In products, power reaches 10 watts, but a separate cooling system is required for their installation.
The technology of placing the OWL (chip-on-board) is performed on a single board. At the same time, several chip samples without a case are installed on the substrate at once
SOV type emitter chips are mounted directly on the board. Due to the coating with a layer of phosphor, the characteristics of heat sink, uniformity of light projection are significantly improved and the cost of the matrix is reduced.
Features of the installation of linear fixtures
Linear LED lamps are installed within 5 minutes - it is enough to apply voltage to one of the plugs, it does not matter which one. It can be mounted independently or in combination with a lamp.
We give an example of installing a lamp. So, on a tube of T8 or T5 format with a G13 cap there are 4 contacts - on both sides, 2. There are several types of cartridges for this type of cap. Their distinctive characteristics consist in the method of fixing to the device body, as well as the method of connecting conductive lines to the socket.
After installation, it remains to connect the wires coming from the LED lamp to the supply voltage terminal. If the lamps are connected in series, they are connected using special contactors
To connect a lighting device, it is necessary to supply voltage to it with a contactor, which is included in the package. But first, open the lamp.
To do this, squeeze out the two plugs and remove them, by alternately pressing a screwdriver on each of the side grooves, without making much effort so as not to break the locking legs. Using the clamping terminal, the lamp contacts are connected to the mains wires. The place of fastening and connecting wiring with clamps are covered with a decorative cap.
To fix the device, several fasteners and self-tapping screws are included. At the desired site, we drill backlash for mounting and fix the lamp on the installed clips. If there are several lamps, they are easily joined using adapters, also supplied in the kit.
Replacing fluorescent lamps with LED
The most common models of old types of fluorescent lamps are presented in two formats: 4 * 18 and 2 * 36. Both of these products are compatible with lamps in the T8 bulb and G13 socket.
Manufacturing companies produce LED lamps for various types of ballasts. First you need to determine what type of equipment is in the device.
There are two options for ballasts: EMPR - electromagnetic type, which is always installed with the starter; Electronic ballast - electronic ballast, when one unit controls all the lamps of the lamp
For example, Philips launches a series of LEDs labeled HF to handle electronic ballasts. This type of lamp allows you to not change the wiring diagram of the lamp, and their replacement is made like traditional fluorescent.
Let's consider how to replace old lamps with LED ones in lamps with electronic ballast.
First of all, the power on the shield is turned off. Further, the process looks like this:
- Remove the reflector.
- Disconnect the wires from the terminal block.
- After dismantling the device itself.
- We remove old lamps and starters.
- We disconnect the wires from the lamp holder using an awl and a screwdriver.
Next, you need to do rework wiring. To do this, we transform the wiring diagram of the lamp - all the lamp holders are connected in parallel, the wiring is wound into the terminal block for connection to the mains voltage.
Since the second side serves as a fastener, all cables are dismantled here. A similar process is reproduced with ballasts - removing wiring and disconnecting from the circuit. We put the cap into the lamp holder on the corresponding side and the device can be installed in its original place.
If you plan to control the radiation intensity of a diode lamp, a dimmer is included in the line assembly circuit. But it should be remembered that not all LED devices are able to work in tandem with this dimmer. Dimmability is indicated in the technical passport of the product.
How to make LED linear lighting for the kitchen working area:
Video tutorial on remaking a lamp for bulb LED lamps:
Overview of the linear version of the Leek Le Eco LED 36W lighting technology:
When planning the installation of a new lighting device, the consumer should not forget about the wide possibilities offered by manufacturers.
A diverse series of luminaires with transparent, matte or corrugated ceiling designs come complete with LED lamps of different capacities and a range of illumination that can be selected based on needs.
Want to talk about how to choose a linear diode lamp for your home or office? Have information to share with potential buyers of such devices? Please write comments in the block below, ask questions and post a photo on the topic of the article.